I followed up on the advice of Thierry, I cleaned the helmet and I removed the rust see
Bulgarian Model 36C
List of Helmets
Return to the blog of Helmliefhebber
The third Bulgarian helmet the Model 36C
I followed up on the advice of Thierry, I cleaned the helmet and I removed the rust see
Bulgarian Model 36C
List of Helmets
I followed up on the advice of Thierry, I cleaned the helmet and I removed the rust see
Bulgarian Model 36C
List of Helmets
Comment
The author of this blog only accepts comments from friends.
You haven't logged in.Clique ici pour poster un commentaire en étant identifié avec ton compte Skyrock et un lien vers ton blog ainsi que ta photo seront automatiquement ajoutés à ton commentaire.
CasquesCollection, Posted on Saturday, 02 May 2020 at 12:10 PM
Hello Bertie ! Thank you for your message! I think using phosphoric acid (as described) is the best solution to stop rust. But I still don't know if the "phosphorized" steel spot is to be rinsed with pure water afterwards! Any idea??? I heard that acid is still "eating" rust if not rinsed with water! But info or intox? All the best Bertie! …. see you in ….October???? In Ciney, if we are still alive! lol ! Thierry
Helmliefhebber, Posted on Saturday, 02 May 2020 at 4:27 AM
CasquesCollection
wrote: "Hello helmliefhebber_ Very nice helmet Indeed_ I suggest you drop some phosphoric acid (50% water 50% acid )on rusted parts in order to stop rust "eating" the steel_ Caution : acid is very dangerous _ Serious hazards_ _ Pour acid into water _ Not water in acid Double check on internet All the best Thierry
"
Hi Thierry, finally I followed up on your advice, cheers Bertie
Helmliefhebber, Posted on Thursday, 29 November 2018 at 3:53 PM
thank you for the advice, that will be something for the coming long winter evenings
CasquesCollection, Posted on Thursday, 29 November 2018 at 10:12 AM
Hello helmliefhebber_ Very nice helmet Indeed_ I suggest you drop some phosphoric acid (50% water 50% acid )on rusted parts in order to stop rust "eating" the steel_ Caution : acid is very dangerous _ Serious hazards_ _ Pour acid into water _ Not water in acid Double check on internet All the best Thierry
Design by the-skyrock-team - Choose this background
Subscribe to my blog! (4 subscribers)
Helmliefhebber, Posted on Saturday, 02 May 2020 at 12:22 PM
CasquesCollection wrote: ""
Hello Thierry
yes, I leave the rust remover on the helmet for about 30 minutes and rinse it off with water. If necessary I repeat the process again.
stay safe and we will meet in Ciney (I hope we see Walter also again)
Bert